English
Français
Español
Deutsch
日本語
Cleaning and maintaining a coffee mixer is important to ensure its longevity and continued performance. Here's how cleaning and maintenance of a coffee mixer can be handled:
1.Unplug and Disassemble:
Before you start cleaning, make sure the coffee mixer is disconnected from the power source to prevent any accidents.
Carefully detach any removable parts, such as the mixing wand, attachments, or mixing cups. Refer to the user manual for guidance on proper disassembly.
2.Rinse Immediately:
After using the coffee mixer, it's a good practice to rinse the mixing wand or attachments immediately under warm running water. This helps prevent leftover coffee or other beverage residues from drying and becoming harder to remove later.
3.Use Mild Detergent:
If the attachments are dishwasher-safe, place them in the dishwasher according to the manufacturer's instructions.
If not, wash the attachments by hand using a mild dishwashing detergent. Fill a basin with warm water and a small amount of detergent. Submerge the attachments and use a soft sponge or cloth to gently clean them.
4.Clean Exterior:
To clean the exterior of the coffee mixer, dampen a clean cloth with warm water and wring out excess moisture. Gently wipe down the surfaces to remove any splatters, spills, or fingerprints. Avoid letting water drip into any openings.
5.Handle Motor Area Carefully:
When cleaning around the motor or power base, be cautious not to allow any water or liquid to come into contact with the motor housing. Moisture can damage the electrical components.
6.Clean with a Brush:
Use a soft-bristle brush, such as an old toothbrush, to reach into tight corners, crevices, or textured areas that may accumulate residue. Gently scrub to dislodge any stubborn debris.
7.Deep Cleaning:
For a more thorough cleaning, disassemble the attachments and soak them in a basin of warm, soapy water. Allow them to soak for a few minutes to loosen any dried-on substances. Then, use a soft brush or cloth to scrub away residue.
8.Lubrication:
Some coffee mixer models may have moving parts that benefit from occasional lubrication. Consult the user manual to determine if lubrication is recommended and which type of food-safe lubricant to use.
9.Inspect Cords and Plugs:
Regularly examine the power cord and plug for signs of wear, fraying, or exposed wires. If you notice any damage, discontinue using the coffee mixer until the cord is repaired or replaced.
10.Storage:
Store the coffee mixer and its components in a clean, dry, and cool location. Keep attachments organized to prevent loss and damage.
11.Avoid Submerging Motor Base:
Never immerse the motor base or power unit in water or any liquid. To clean the base, use a damp cloth to wipe away dust and spills, and dry it thoroughly.
Voltage: DC 3V
Material: 304 Stainless steel + ABS
Color: Any colors can be done as custom
Product weight: 102g
Warranty: 1 year
